Designs and Logos with Bedliner

Adding Designs and Logos in Bed Liner

One aspect of bedliner such as Raptor Liner that many people aren’t aware of is the ability to create intricate designs. This is a great way to add some interest and detail to your vehicle sprayed with bedliner, or you can use it on just a part of a vehicle, such as the tonneau cover or the bed itself. It certainly takes the vehicle up a notch!

Painting a design with bedliner

Here, we can see some added the 4×4 callout to the side of their vehicle, which is sprayed in a very nice blue hue of bedliner. My guess is that this was painted on, but it could have been sprayed with bedliner with some careful masking. The blue hue could be done with the Raptor Liner Tintable Bedliner Kit.

Here, we can see some added the 4×4 callout to the side of their vehicle, which is sprayed in a very nice blue hue of bedliner. My guess is that this was painted on, but it could have been sprayed with bedliner with some careful masking.

Designs with Bedliner

Above is a great example of someone using the bedliner itself to create an interesting design on the vehicle. It’s possible that this truck had some paint damage or other problems with the front end that the owner wanted to cover up. If so, he definitely took it to the next level with the Ram symbol on the hood surrounded by flames! To pull this off, you just need to mask the area well before spraying the bedliner material, then remove the tape before it dries. That way you get clean lines without peeling up the adjacent bedliner or risking your masking tape being permanently embedded in the surface.

If you are planning your bedliner project, remember the sky is really the limit! Don’t limit yourself to the all-or-none approach taken by so many. With a little added time and patience, you can add an interesting and unique design to your vehicle. Finally, be sure to read my step-by step guide before getting started on your project, it may save you time and some money too.




Leave a Reply

Your email address will not be published. Required fields are marked *